top of page
137304896_3721178574605664_4444543826758763380_o.jpg

Heavy Rescue 495

2010 Pierce Velocity Heavy Duty Rescue

See below for apparatus contents

Contents

– 2010 Pierce Velocity with 24′ Tandem Axle Heavy Duty Rescue
– Eight-man / 84″ extended cab / 20″ raised roof
– Detroit Diesel Series 60 engine – 515 HP (2009 emissions)
– Allison six-speed automatic transmission
– Jacobs engine brake
– Pierce TAK-4 Suspension System
– Side Roll Protection System
– Command Zone Electronics
– Rearview back-up safety camera
– Event recorder DVR system
– Electronic Stability Control / Automatic Traction Control / Anti-lock Brakes
– Rud automatic tire chains
– Front tire safety bands
– Pierce PS6 seats for (8), (7) with SCBA
– FireCom wireless intercom with dual-radio interface
– 55 Kw Winco direct drive electrical generator
– 185 CFM Van-Air PTO driven pneumatic tool compressor
– Six bottle, 6000 PSI Breathing Air Cascade with Sierra Booster with Frank’s removable awning system over cascade operator’s panel and two-cylinder SpaceSaver fill station
– Twin Wil-Burt light towers, each with (6) 900-watt floodlights, along with (8) fixed-mount 900-watt floodlights and 12 volts Whelen LED approach scene lights on the front and sides of the cab. (900 HIR fixtures have the same light output – or lumens – as traditional 1500 watt quartz lights)
– Four 200′ electric cord reels
– Six 100′ hydraulic tool reels, including two on front bumper allowing for six preconnected TNT rescue tools, (two spreaders, two cutters, six rams, a combination tool, mini-cutter, and a 6.5 HP TNT Accelerator portable gasoline power unit)
– TNT DT-10 Diesel-hydraulic tool power plant with remote start for four TNT tools, with two additional tools supplied from a 220-volt electric Simo pump.
– One 200′ utility air reel from cascade system
– One 200′ high pressure breathing air reel from cascade system
– One 150′ reel of 1″ ID airline from PTO compressor
– 15,000 lb. front mount Warn winch
– 9,000 lb. portable Warn winch with aramid rope and six attachment points at various locations around rig
– Eight roof mount, three front, and three rear rigging points in addition to portable winch mount locations
– Removable davit system for access to equipment in rooftop compartments
– (2) preconnected reciprocating saws
– (2) 36-volt reciprocating saws with Robo-Pak batteries
– Milwaukee Portable Bandsaw
– ArcAir Slice Pack Exothermic Torch
– Petrogen Portable Cutting System – Oxy-Gasoline Cutting Torch
– Honda 5000 watt Portable Generator
– (2) Honda 1000 watt Portable Generator with 750-watt Floodlight
– Paratech Maxiforce Air Lifting Bags
– (1) 1.5 Ton
– (1) 3 Ton
– (1) 5 Ton
– (1) 8 Ton
– (2) 12 Ton
– (2) 17 Ton
– (2) 22 Ton
– (2) 32 Ton
– (2) 44 Ton
– (2) 55 Ton
– Paratech Rescue Struts and Accessories
– Paratech Long Shore Raker System
– Paratech Monopod, Bi-Pod, and Tri-Pod kits
– Paratech Low-Pressure Air Cushions
– Rope Rescue Equipment
– Heavy Rigging including Chains, Slings, Come Alongs, and TU-28 Grip Hoist
– (3) Stihl Rotary Saws (Concrete, Vent Saw and Forcible Entry Saw)
– (3) Chain Saws (Stihl – Two gasoline and one Electric)
– (8) Scott 4.5 SCBA with 45 Min Cylinders
– (2) Scott RIT Packs with 60 Min Cylinders
– (8) Scott 45 Min Cylinders – Spare
– (8) Scott 60 Min Cylinders – Spare
– (2) 24′ Extension Ladders
– (2) 14′ Roof Ladders
– 10′ Attic Ladder
– 12′ Little Giant Ladder
– Pike Poles (4) 6′, (3) 8′, (3) 10′ (1) 40″, (1) 32″, (1) 4-6′ telescopic
– (2) PW Extinguishers
– (2) 20 LB ABC Extinguishers
– (1) AFFF Extinguisher
– Thermal Imager
– 16″ Smoke Ejector
– Electric PPV Fan
– CSR Blower and Ducting
– (8) Portable Radios
– Cross Band Radio Repeater System for Fireground Communications
– Extensive hand tool compliment
– Assorted Air tools
– EMS equipment and defibrillator
– Stainless Steel Basket Stretcher with rigging
– SKED Stretcher, LSP Half-Back, Miller Body Splint, Half-SKED
– Skedco Tripod
– (4) Scott SABA with 200′ umbilical with hardwire communication, airline, and tagline
– Air Systems Breathing Air Manifold
– Con-Space Communications System
– Stanley Hydraulic Tool System with DS-11 Diamond Chainsaw, BR-72 Breaker, HD-45 Rotary Hammer, DR-19 Breaker, and SM20 Submersible Pump, along with HP-1 Power Unit
– Electric Demolition Hammer and Hammer Drill

bottom of page